When the portable power station is not used for a long time, the correct storage and maintenance methods are essential to extend its service life. Here are some detailed storage and maintenance steps:
1.
Power management
2.
Avoid over-discharge: Charge the portable power station to 60%-80% before storing it. If the power is seriously insufficient, it may cause the battery to be over-discharged, causing irreversible damage to the battery cell, thereby reducing the service life of the power supply.
·Regular charging and discharging: It is recommended to check the power supply every 3 to 6 months. If the power is less than 30%, it can be replenished to 60%-80%. This cycle is recommended to be controlled within 4 months to protect the battery and extend its service life.
3.
Environment selection
4.
·Temperature control: The ambient temperature for storing the portable power station should be kept between -10℃ and 40℃. High temperature will accelerate battery aging, while too low temperature may cause battery performance to deteriorate.
·Humidity and ventilation: Make sure the storage environment is dry and well ventilated. Humidity may cause short circuits or circuit board damage, so avoid placing the power supply in humid places such as kitchens and bathrooms.
·Avoid direct sunlight: Do not expose the power supply to sunlight or high temperature environments such as in the car to prevent the battery from overheating.
5.
Safety measures
6.
·Keep away from dangerous sources: Keep the power supply away from water, heat sources and other metal objects to ensure safety.
·Prevent external damage: Use a protective case or box to wrap the power supply to avoid damage caused by falling or collision.
7.
Other precautions
8.
·Prohibit overload: When using a portable energy storage power supply, be sure to avoid overloading to prevent the battery from overheating or damage.
·Comply with the instructions: When using and storing a portable energy storage power supply, be sure to comply with the relevant regulations in the product manual or user manual.
In short, by following the above steps and suggestions, you can effectively store and maintain the portable energy storage power supply, ensure that it can be used normally when needed, and extend its service life.
